Turning Your Smart Control On And Off - Unitron Smart Control Mode D'emploi

Your Smart Control uses the most modern
components to provide an extremely reliable
experience with virtually no interference from
other devices. However, when operating
the Smart Control near a computer terminal,
communication device such as a digital
cell phone, or other strong electromagnetic
field, it may be necessary to be at least 24
inches (60 centimeters) away to ensure
proper operation. If your hearing aids do not
respond to the Smart Control because of an
unusual field disturbance, move away from
the disturbing field.
Labeling
The serial number and year of manufacture are
located inside the battery compartment. Please
fill out the contact information sticker provided
with your new Smart Control
which is located inside the
battery compartment.
6
Turning your Smart Control
on and off
Your Smart Control has an On-Off (or travel lock)
switch on the left side of the remote.
To turn the remote control on, slide the switch
into the On or unlocked position .
To turn the remote control off, slide the switch
into the Off or locked position . Sliding the
switch to the Off position will avoid sending
unintentional commands to your hearing aids
(while the remote is in your handbag or pocket,
for example).
Off
On
7