Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Step 7
Insert the handlebar (3L/R) onto the rock arm (12L/R) res-
pectively, secured in place with the carriage bolts (55), arc
washers (54), and acorn nuts (44).
Step 8
•
Fit and lock the handlebar cover (58a/b) to the stationa-
ry handlebar (8) with the Phillips screws (56) as shown;
•
Connect the pulse sensor wires (40) and upper console
wire (36) to the relevant wires from the console (10).
•
Then attach the console (10) to the mast (2), secured
with the Phillips screws (42) and flat washers (41).
24
Publicité
Table des Matières
