DOM FAMILY Coast Rider Manuel D'instructions page 13

USING THE STROLLER CONNECTOR Sold separately)
The connector can be used for
most compact baby strollers.
(1) Press the quick release
button on the connector to
connect it to the rider as
shown in figure A/B/C. To
detach the connector, press
the quick release button to
remove it.
(2) To attach the connector to
rear leg of your baby stroller,
use the strap located on the
other end of the connector.
Make sure that the strap is
tight enough to velcro it as
shown in figures D/E/F.
ATTENTION:
When using the connector on
the left rear leg of your baby
stroller, connect it to the right
front leg of your Coast Rider,
and vice versa. Refer to
Figures G/H.
ASSEMBLY
A
C
E
GH
13
B
D
F
H