Product Description; Battery Information - LEXIBOOK RP500DC Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

1. MODE button: Selects the setting mode.

2. SCAN button: Search the radio frequency to find radio channels.

3. RADIO OFF / ON / VOLUME knob: Roll the knob to turn the radio on or off and

increase or decrease the volume.

4. RESET button: Resets the radio frequency so you can start scanning for

channels from the beginning.

5. LCD screen

6. Battery compartment (at the bottom of the unit)

7. Night-light rubber feet

8. SET button: Selects a setting.

9. ADJUST button: Changes the number and activates the snooze function.

10. Lightning McQueen button

11. Speaker

12. Projector

13. PROJECT button: Projects the time and a Cars icon onto the ceiling.

Your Cars Radio Alarm Clock Projector works with 4 x 1.5V

AA / LR6 type batteries (not included).

When you use the RP500DC for the first time:

1. Using a screwdriver, open the battery compartment

cover located at the bottom of the unit.

2. Install the AA/LR6 1.5V

observing the polarity markings inside the battery

compartment.

3. Close the battery compartment and tighten the screw.

IMPORTANT NOTE: For better performance, it is recommended to use alkaline

batteries with this product.

Non-rechargeable batteries are not to be recharged. Rechargeable batteries

are to be removed from the product before being charged. Rechargeable

batteries are only to be charged under adult supervision. Different types of

batteries or new and used batteries are not to be mixed. Only batteries of the

same or equivalent type as recommended are to be used. Batteries are to be

inserted with the correct polarity. Exhausted batteries are to be removed from

the product. The supply terminals are not to be short circuited. Do not throw

batteries into a fire. Remove the batteries if you are not going to use the

product for a long period of time.

RP500DC_IM1091_2nd 1Mar11.indd 8