Care And Maintenance - Giardino COSYFLEX Mode D'emploi

Assemble the rotation device (C) in the crossed base, and then fasten four hexagon
head tap bolts (CC) with the hexagon head wrench (BB). (Fig. 2)
Fig.3
• Step 3
Insert the column (B) in the rotation base, and then fasten two screws (EE) with
socket head wrench (AA).Fig. 3)
Fig.4
• Step 4
Insert the umbrella (A) into the column (B). Secure the canopy at the same direction
with the foot lever of the rotation device, and then loosen the umbrella tie. (Fig. 4)
• Step 5
Crank the handle until the umbrella opens fully. (Fig. 5)
• Step 6
Track the knob upward to adjust the umbrella to your desired height and angle. Turn
right to lock the position, turn left to loose for up and down. Step on the foot lever to
rotate the umbrella to your desired direction. (Fig. 6)
The umbrella is ready to use.

CARE AND MAINTENANCE

Wash with mild soap and water, rinse with clean water and let air dry.
Always let the umbrella dry completely before storing.
When not in use, store the umbrella out of extreme weather or strong wind.
Fig.5 Fig.6