XLC Azura Xtra Led Instructions D'emploi page 62

62
5. Lift into the back wheel rails
Lift the bicycle from the front wheel rails into the rear
wheel rails.
Make sure that the bicycles are in the middle
of the carrier.
6. Bring the frame clamps to height
Loosen the frame clamp with the lock knob. Adjust
the arm to the correct height.
Never turn the lock knob fully out of the screw
thread.
7. Fix the fame clamps
Position the frame clamp preferably as high as
possible on the saddle tube. Turn it fi nger-tight.
8. Lock the frame clamps
Use the lock knobs to prevent theft of your bicycles
After locking remove the key from the lock.