XLC Azura Led Instructions D'emploi page 58

58
9. Move the wheel rails
Slide both wheel clamps as close as possible to the
wheels and fasten the wheel straps: insert the wheel
straps through their openings and tighten them.
10. Place a second bicycle
Repeat steps 1 to 9 for the second bicycle.
Always place a second bicycle in the opposite
direction to the fi rst bicycle.
11. Check fastening points
Check whether:
• the frame clamps are tightened fi nger-tight.
• the wheel straps are pulled tight.
• the keys have been removed from the lock
knobs.
12. Check the position of the carrier
The bicycle carrier must be fi xed upright on the
tow bar. You can check this by looking from
the side to see if the central tube is vertical.