asalvo baby SILLA LIDER Manuel D'instructions page 12

12
EN
Insert the end of the bumper bar into adaptor on each side of the hinge.
Put the shim onto the rear
axle. Put on the wheel.
Then, put another shim.
Lock the wheel with
thecotter. Put on the cover.
Note: Repeat the above
steps with the other side of
the axle
ASSEMBLE THE BUMPER BAR
ASSEMBLE THE FRONT WHEEL
Press down the lock pin on the front tube, insert
the front tube into the adaptor of the front wheel
until you hear the click sound.
CAUTION: Make sure the wheels are properly
installed before using the stroller.