Beschreibung Des Bedienfelds - Rowenta AQUA BOOST HU402 Série Mode D'emploi

Masquer les pouces Voir aussi pour AQUA BOOST HU402 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN
Programmed timer period has
run out.
The mist suddenly
The water level indicator is
stops coming out
blinking.
The target humidity level is
reached.
The product is in warm-up
phase.
The warm mist
The mist is too fine to feel the
function doesn't
warmth.
produce any warm
The room temperature is too
humidity
cold and the mist may cool
down too quickly.
The appliance does
not work with no
There is no power supply.
display on screen
It's first use of appliance.
There is abnormal
The water used is dirty or has
smell mist
rested too long in water tank or
water base.
There are apertures between
Mist fog is coming out
the nozzle, the cover and the
from around nozzle
water tank.
The appliance shows E1 error
on the screen.
The mist does not
There is not enough water in
start.
the water tank of the appliance,
or you have just filled your
water tank.
ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If this appliance uses batteries: help us look after the environment, by not throwing away
your used batteries.
Instead, bring them to anyone of the special battery collection points. Do not throw them
away with your household waste.
These instructions can also be found on our internet site www.rowenta.com.
This user manual is downloadable online.
Turn your product on.
Refill the water tank.
Wait a few minutes till the end of the
phase.
Increase the mist volume level.
Increase the mist volume level and Heat
the room up.
Plug in power plug in main sockets.
The smell will disappear after several
minutes of use.
Clean the water tank and the water
base according to the Maintenance
Instructions.
Reposition the cover and check if the
nozzle is well plugged in the cover.
Close the lid correctly, the appliance will
start.
Check if the NO WATER indicator is
displayed on the screen. Proceed with
refilling the water tank of your appliance.
After filling the water tank, wait 2 to 3
minutes until the appliance outputs mist.
24
24
Zu trockene Luft kann Nasennebenhöhlen und Atemwegsprobleme verursachen oder verschlim-
mern, zu trockener Haut, Nase und Rachen führen und Pflanzen und Möbel austrocknen.
Ihr Luftbefeuchter ist ein effektives Gerät zur Diffusion von Wasserdampf in der Umgebungsluft.
Luftfeuchtigkeit, die als relative Feuchtigkeit (rF) ausgedrückt wird, ist die in der Luft vorhandene
Dampfmenge, ausgedrückt als Prozentsatz der maximalen Dampfmenge, die die Luft bei dersel-
ben Temperatur halten kann, ohne Kondensation zu verursachen.
Die relative Luftfeuchtigkeit wird mit einem Hygrometer gemessen.
FUNKTIONSPRINZIP
Ihr Luftbefeuchter verwendet zwei sich ergänzende Befeuchtungssysteme:
• Ein Kaltdampfsystem: eine Keramikscheibe, die mit einer Ultraschallfrequenz vibriert, um win-
zige Wassertröpfchen zu erzeugen.
• Beheiztes Nebelsystem für antibakterielle und Turbo-Effekte.
Der Luftbefeuchter kann somit zur automatischen Erhöhung der Luftfeuchtigkeit der Umge-
bungsluft eingesetzt werden und verfügt zudem über ein elektronisches Hygrometer zur präzisen
Regelung der relativen Luftfeuchtigkeit.
AUFSTELLUNGSORT
Der Einsatz eines Luftbefeuchters ist besonders im Winter zu empfehlen, dennoch sollte das Haus
regelmäßig gelüftet werden.
Stellen Sie den Luftbefeuchter zunächst in dem Raum auf, der am dringendsten behandelt werden
muss. Er eignet sich für einen Raum bis zu 53,6 m
PRODUKTBESCHREIBUNG (1)
1. Abnehmbares oberes Gehäuse
2. Wassertank
3. Unteres Gehäuse
4. Bedienfeld und Bedienfeldanzeige
5. Standfüße
6. Luftauslass des Lüfters
7. Keramikscheibe

BESCHREIBUNG DES BEDIENFELDS (2)

Bedienelemente
A. Ein/Aus-Taste
B. TIMER-Taste
C. Taste Nebelfunktion / Stufe (kalt/warm & min/max).
D. Taste für Feuchtigkeitssollwert (HUMIDITY TARGET)
E. Taste für Modus AUTO KOMFORT
F. Taste „Nacht" (NIGHT)
Digitalanzeige
GSymbol für Nebelvolumen
H. Symbol für Luftfeuchtigkeit in Prozent
I. Timer
J. AUTO = Modus AUTO KOMFORT
K. Nachtsymbol
L. Alarmsymbol für Reinigung
M. Feuchtigkeitssollwert
N. Anzeige für geringen Wasserstand
2
(577 Quadratfuß).
8. Wasserstandssensor
9. Wasserauslass
10. Wassereinlass
11. 360-Grad-Nebeldüsen
12. Oberer Einfüllstutzen
13. Kamin
25
25
DE

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aqua boost hd4040Aqua boost hd4045

Table des Matières