Important Safety Instructions; Product Features - iDance groove 980 Mode D'emploi

Systeme de sonorisation portable 1000 watts tout-en-un
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
CAUTION: TO REDUCE THE RISK OF FIRE OR
SHOCK, DO NOT REMOVE COVER OR BACK.
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL
Class II equipment symbol
This symbol indicates that
the unit has a double system.

IMPORTANT SAFETY INSTRUCTIONS

1.
Read these instructions.
2.
Keep these instructions. Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with dry cloth.
6.
Do not block any ventilation openings.
7.
Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety of the polarized of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has
been dropped.
15.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
16
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
17.
The MAINS plugs used as the disconnect device, which shall remain readily operable.

PRODUCT FEATURES

Ultra-low distortion amplifying circuit
Digital karaoke, treble and bass independent adjustment
Built-in MP3 encoding supporting U disk
Unique acoustic appearance design
Professional treble and bass gain controlling circuit
Built-in battery for outdoor activities
Built-in professional wireless microphone system
Professional high-effective loud-speaking unit
Compatible to DVD/VCD/PC and other sound sources
Suitable for adaptor and charging
Intelligent power switch charging circuit
Attention
The product has been installed with battery, making it applicable to the outdoor singing, advertisement, recreation and other activities. Please
charge the battery before using it outdoors, so as to guarantee that the machine can be used for a longer time outdoors. The machine has
been set with power switch circuit. When you connect the adaptor to the power and insert the plug to the charging interface, the machine will
switch to the power supplied by the adaptor automatically and charge the built-in battery. When the adaptor interrupts the power, the machine
will intelligently switch to the built-in battery for work continuously. When adaptor is used to charge the battery, the integrated intelligent charg-
ing circuit within the machine will give hints about charging and the charging indicator lamp will light. After charging is finished, the intelligent
charging circuit will give hint to that that the charge has been fully charged and light the charging indicator lamp. At this moment you can close
the AC power of the adaptor. If you still use adaptor in the machine to work, the charging circuit will automatically cut off the charging circuit
and it is unnecessary for you to worry about the charging breaking. You shall notice that the battery has certain service life and it is beyond the
warranty scope of the company. Under general circumstances, the built-in battery needs charging 8-10 hours. With more charging times, the
battery volume will change and full charging time will reduce accordingly. When the battery is out of charge after being used for a short time,
please change the built-in battery. The user shall also notice that if the electricity quantity of the battery is reduced when using the machine
outdoors, please close the power switch on the rear plate and charge the built-in battery within 24hours. If the electricity quantity of battery is
totally consumed, the situation that the battery can not be charged and the service life is expired will happen. When you don't use the machine
for a long time and leave it alone, please charge the battery every six months, so as to avoid the invalidity of battery.
The exclamation mark inside an equilateral triangle is intended to alert user of the presence
of the important operating and maintenance (servicing) instructions in the literature
accompanying the product.
The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert
User of the presence of un-insulated "hazardous voltage" within the product's enclosure,
which may be of sufficient magnitude to induce a risk of electric shock to persons
NOTES:
Please do not attempt to open the back cover or power adapter as opening or removing the
covers may expose you to dangerous voltage or other hazards, and it will also cause the
restricted servicing to be disabled: There are no user servicing components inside.
NOTES:
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
NOTES:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for assistance.
ENGLISH

Publicité

Table des Matières
loading

Table des Matières