Technical Data - Renkforce CAT6A Mode D'emploi

• Carefully cut into the respective pair of shielding e.g. using a side cutter.
Guide the shielding to the insulation displacement connectors.
• Connect the leads (starting with insulation displacement connector 8 at the very end) with a
suitable punch down tool. Pay attention to the correct colour coding.
• Finally fix the cable with a cable tie. Do as described above for other network cables.
• Once all cables are connected, put the cover on again and let it snap into place.
• Install the patch panel into your network cabinet. Suitable installation material is enclosed for
this purpose.
• Attach the ground cable of the patch panel to a dedicated port on your network cabinet.
• Label the network ports on the patch panel in a suitable way, so that in case of faults you can
better control the ports and cable connections.
Disposal
The product must not be disposed of in the household waste. Dispose of an unser-
viceable product in accordance with the relevant statutory regulations.

Technical data

Specification .................................. CAT6A
....................................................... ISO/IEC 11801:2002 Class EA
....................................................... EN 50173 Class EA
....................................................... EIA/TIA 568-C Cat.6A IEC 60603-7-51
....................................................... supports PoE per IEEE 802.3af, PoE+ per IEEE 802.3at
....................................................... LSA T568A/B
Cable entry .................................... horizontal
Cable type ..................................... STP
Height units .................................... 1 HE
Suitable network cabinet ............... width = 483 mm (19")
Number of ports ............................. 24
Ambient conditions ........................ temperature: -10 °C to +60 °C,
air humidity 10% to 85% relative, not condensing
Dimensions .................................... 482,6 x 106,8 x 44,45 (W x D x H)
Weight ........................................... 1440 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE. 1676579_V2_0718_02_VTP_m_en