Nursery Works EMPIRE ROCKER Manuel D'instructions page 2

The Product and Manufacturing Process:
Nursery Works products are made from sustainable
woods wherever possible and also from
high-quality wood veneers. The primary materi-
al used in our products is Paulownia wood
which is harvested from plantations and
renewed every 10-12 years. Zero-grade MDF,
containing well below the regulated limit of
formaldehyde, is used sparingly in components
of our products to achieve our signature
carvings and single board slat cutouts. All
paints, finishes and glues are low-VOC. Our
products are tested on a frequent basis to
ensure that all coatings and finishes comply
with U.S. and Canadian metals requirements.
Each Nursery Works product is a unique piece
crafted largely by hand. We use a specialized
machinery process to create our hallmark
carvings and each piece is constructed and
lacquered by hand. Our lacquering process
involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nursery Works products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our products
and our use of solid woods, each piece is
unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural characteristics
are inherent in wood, are not considered
manufacturing defects and do not merit
replacements.
1