Assembly; Assembling The Breastmilk Expression Set - Lansinoh SMARTPUMP Mode D'emploi

4. ASSEMBLY

4.1 Assembling the Breastmilk Expression Set

1. Place purple silicone diaphragm,
arrow side up, on top of breast flange
body. Ensure diaphragm fits securely
between rims of breast flange body
and arrows point toward breast flange.
2. Place clear diaphragm cap over
breast flange body and twist to
secure so that the tubing portal is
facing the back of the pump.
10
Smartpump_Manual_CA_082317.indd 10-11
Diaphragm Cap
Diaphragm
ComfortFit Breast Flange
™
Breast Flange Body
White Valve
5 oz Breastmilk
Collection Bottle
3. Firmly push ComfortFit Flange into
™
breast flange body.
NOTE: Use care when handling and cleaning the small white valve.
5. Screw collection bottle onto breast
flange body.
7. Attach other end of 300 mm tubing to
Tubing Y Connector.
4. Holding the base of the white valve,
gently secure the valve into the
bottom of the breast flange body.
6. Attach end of 300 mm tubing to back
of diaphragm cap. Ensure that tubing
is pushed all the way to the base of
the attachment port and completely
covers it.
8. Repeat assembly process for second
breast flange body.
8/28/17 11:49 AM
11