Goalzero SHERPA 100PD Mode D'emploi page 4

USING YOUR SHERPA
BUTTONS:
Press once to turn the USB ports on/off.
Turn Qi wireless charging on/off. Button light is blue when
Qi wireless charging is turned on and turns green when
connection with device is made and charging begins.
NOTE: Battery level display screen will turn on when either power or Qi
wireless charging is turned on. Both Power and Qi wireless charging must be
turned off in order for the display screen to turn off
PASSTHROUGH CHARGING
It is possible to recharge other devices while the Sherpa is being charged.
Plug the Sherpa into a power source and make sure it's still powered on, then
plug the device into the Sherpa.
4
TECHNICAL SPECIFCATIONS
Sherpa 100PD
Charge times:
USB-C PD Source 2.5 hrs
(60W)
Wall charger 3 hrs
(45W)
USB-A (2.4A) 9 hrs
Nomad 14 14-28 hrs
Nomad 28 7-14 hrs
Battery:
Cell chemistry Li-ion NMC
Cell type 18650 by LG chem
Single Cell Equivalent 25600mAh @ 3.7V
Capacity
Lifecycles Hundreds of Cycles
Shelf-life Charge every 3-6
months
Management Charging and low-
system battery protection
built-in
Be sure to activate your warranty at
goalzero.com/warranty
Ports:
Wireless Qi (output) 5W max
USB A ports (output) 5V, up to 2.4A (12W
max), regulated,
3.4A(17W max
Combined)
USB-C PD ports 5V,9V,12V,15V,20V
(input/output) up to 3A (60W each,
100W max), regulated
General
Chainable no
Weight 1.4 lbs (898 g)
Dimensions 7.5 x 1.0 x 3.7 in (19.0
x 2.54 x 9.4 cm)
Operating usage 32-104F (0-40C)
temp.
Certs
Warranty 12 months
5