Getting Started; Ipod Playback Features; Important - Pioneer IDK-01 Mode D'emploi

Getting started

Chapter 4
Getting started

iPod playback features

Once you have connected everything, you're
ready to starting watching videos and listening
to music. Follow the steps below for an intro-
duction to your iPod dock.
1 Place your iPod into the dock connector port.
Make sure you have fitted the connector port
with the iPod type connector that matches your
iPod model (see Attaching the iPod type adapter
on page 6 to do this).
2 Select the proper input on your AV
receiver (or power amplifier).
To use the on-screen display or to watch video,
you must also switch on your TV or monitor.
3 Start playback.
Check the table in Basic remote controls below
for an explanation of the playback features
available with this system.
• Since the volume of the iPod cannot be
controlled using this unit, please adjust the
volume using the AV receiver or power
amplifier to which you have connected.
Pla list Shuffle
y
Pla y list
Note
1 You can also use your iPod main unit controls for playback. Please refer to the manual supplied with the iPod for more on this.
1
OSD
On/Off
Menu
Enter
Re p eat
Basic remote controls
The following table shows the basic playback
controls for your iPod:
Button What it does
Switches on/off this unit's on-screen
OSD
On/Off
display (this appears on the video com-
ponent to which you're connected).
Returns to the previous menu.
Menu
Selects menu items/levels.
Enter
Starts/pauses playback.
Press and hold during playback to start
scanning.
Press to skip to the previous/next song.
Starts playback of the previous/next
Pla y list Pla list
y
playlist.
Press repeatedly to switch between
Shuffle
shuffle play options.
Press repeatedly to switch between
Re eat
p
repeat play options.
Use these buttons to move the cursor
(on-screen).

Important

• This system is compatible with the audio of
an iPod mini, iPod Photo, iPod nano and
iPod Video (third or later generation) and
the video of an iPod Photo and iPod Video.
04
9
En