Media Mode - Korg PA 600 Manuel D'utilisation

Media Mode

Loading Factory Styles and Pads
If the "Factory Style and Pad Protect" parameter is not checked
in Global > Mode Preferences > Media, when loading data to the
internal memory you can also choose Factory Style and Factory
Pad locations as a target.
When loading single Styles or Pads (or a bank of Styles or Pads),
open the target banks until you find the desired locations; Fac-
tory locations will be treated exactly as if they were Favorite/User
locations.
When loading a ".SET" folder, all Factory Style or Pad it contains
are loaded into the corresponding Factory locations in memory.
Warning: After confirming, any data existing at the target location
will be deleted.
Saving Factory Styles and Pads
If the "Factory Style and Pad Protect" parameter is not checked
in Global > Mode Preferences > Media, when saving data from
the internal memory you can also choose Factory Style and Fac-
tory Pad data.
When saving single Styles or Pads (or a bank of Styles or Pads),
open the source folders until you find the desired item; Factory
data will be treated exactly as if they were Favorite/User data.
When saving all the memory content, you can choose to also
save Factory Styles and Pads. After you have selected the full
content ("All") of the internal memory, and have confirmed a
new or existing ".SET" folder into which to save your data, you
are asked to choose the type of data you want to save:
Save All dialog with the Factory Style and
Pad Protect option turned on
Save All dialog with the Factory Style and
Pad Protect option turned off
After confirming, the Factory Styles and Pads are saved into the
".SET" folder.
KORG Pa600 – Operating System release 1.1
Factory Restore and Resource Restore of
selected data types
Now, you can choose the type of data to be restored to the origi-
nal Factory status or from a Backup archive.
[1.1]
After having executed the Factory Restore or Resource Restore
command from the Media > Utility page, a dialog box will
appear, with a list of types of data to be restored. Only check the
types of data you want to restore.
You can choose individual types of data by touching "All" to
deselect it, and select the individual types:
[1.1]
Warning: This command will delete from the internal memory all
the types of data selected in this dialog box (including your custom
data).
When done, a message will appear, asking to restart the instru-
ment ("Data Restored. Please switch off "). Set the instrument to
standby mode, then turn it on again.
New Backup file format
The file format for the backup archive created when choosing
the "Backup Resources" command from the Media > Utility page
is new. Therefore, you cannot load backup archives created with
this OS version to Pa600 models still using an OS older than ver-
sion 1.1.
Renamed Resource Restore command
The "Full Resource Restore" command in the Media > Utility
page has been renamed to "Resource Restore".
3
Media Mode
[1.1]
[1.1]
[1.1]