Quick Steps; Dishwasher Use - Jenn-Air W10300216A Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
Prepare and load
dishwasher.
2
Add detergent
for cleaning and
rinse aid for
drying.
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
10 Place load pattern
Upper rack
12 Place load pattern
Upper rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
STEP 1
Lower rack
Lower rack

Quick Steps

3
Select a cycle and option.
(Cycles and options vary by model.)
4
Start dishwasher.
NOTE: If the Start/Resume button is
located on the top of the door, push
the door firmly closed within
3 seconds of pressing START/
RESUME.

Dishwasher Use

Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
When loading silverware, always place sharp
items pointing down. Mix some of the items
having pointing up and some pointing down.
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
STEP 2
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières