Patton BBQ C2 Charcoal Chef Instructions D'utilisation Et De Montage page 45

STEP8
Loosen the pre-assembled Self-Tapping Bolt from the end of Crank Handle
(27), then rotate the Crank Handle (27) into the hole of the front panel.
Fasten the Self-Tapping Bolt to the end of the Crank Handle ( 27)，after
rotating the Crank Handle（27） into the hole of the front panel.
Note: Make sure to rotate the crank handle counterclockwise completely to
the end.
NL, BE, LU
Self-Tapping Bolt
45
Self-Tapping Bolt
27
14