About Your Ae33H Scanner; To Change The Band Plan - Albrecht AE33 H Mode D'emploi

ABOUT YOUR AE33H SCANNER

Thank you for purchasing a Albrecht AE33H Handheld Scanner. The
scanner is versatile, compact and easy to use.
The AE33H comes pre-programmed with frequencies - organized into 9
pre-programmed Service banks for monitoring emergency, Freenet,
PMR446, Marine, VHF-Low band, FM radio band, Air band, VHF-High
band and UHF band frequencies.
Each Service bank has memory locations for storing your favourite
frequencies. Up to 180 frequencies can be stored in Favourites banks.
Frequencies in Favourites can be copied from the Service bank.
Manually store your favourite sports or events frequencies found through
the internet and other sources. The radio comes with often used specific
frequencies
factory-programmed in the service bands (e.g. band plan 1 has religious
broadcast frequencies used in UK, while band plan 2 offers the typical
emergency frequency steps and parameters used in the German 4 m
band)
Additionally you have 3 Instant channels which are one-touch keys to
store your 3 most important frequencies.

TO CHANGE THE BAND PLAN

You can change the band coverage by band plan. While band plan 1
covers more the international frequency usage, band plan 2 is
preconfigured for special needs in Germany.
To switch the band plan between 1 and 2.
1.
Make sure the power is turned off.
2.
While holding down (1) or (2) key, turn on the scanner.
Band Plan 1...(1) key
Band Plan 2...(2) key
Notice: Any Band Plan change will modify the factory preset channel
steps settings of all bands and the memory contents of the Emergency
bank.
32 English