Daily Use; Hints And Tips - Zanussi ZRA40100XA Notice D'utilisation

Masquer les pouces Voir aussi pour ZRA40100XA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A medium setting is generally the
most suitable. However, the exact
setting should be chosen keeping in
mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.

Daily use

WARNING!
Refer to Safety chapters.
Initial power on
CAUTION!
Before inserting the power plug in to
the outlet and switching on the
cabinet for the first time, leave the
appliance standing upright for at
least 4 hours. This will assure a
sufficient amount of time for the oil
to return to the compressor.
Otherwise the compressor or
electronic components may sustain
damage.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.

Hints and tips

Normal operating sounds
The following sounds are normal during
operation:
• A faint gurgling and bubbling sound from
coils sound when refrigerant is pumped.
18
If the ambient temperature is high or
the appliance is fully loaded, and the
appliance is set to the lowest
temperatures, it may run
continuously causing frost to form
on the rear wall. In this case the
regulator knob must be set to a
higher temperature to allow
automatic defrosting and therefore
reduced energy consumption.
Positioning the door shelves
To permit storage of food packages of various
sizes, the door shelves can be placed at
different heights.
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
1
3
2
• A whirring and pulsating sound from the
compressor when refrigerant is pumped.
• A sudden cracking noise from inside
appliance caused by thermic dilatation (a
natural and not dangerous physical
phenomenon).
www.zanussi.com

Publicité

Table des Matières
loading

Table des Matières