System Overview - Festo MTRE−ST42−48S Séries Notice D'utilisation

MTRE−ST42−48S−..
The MTRE−ST−... can only be operated in accordance with the relevant safety
guidelines if the maximum loading limits are observed.
Please observe the regulations applicable to the place of use and comply with
S
national and local regulations.
Remove the packaging except for the cover caps of the electrical connection.
S
The packaging is intended for recycling purposes (except for oiled paper which
must be disposed of ).
Take into account the prevailing ambient conditions.
S
Use the MTRE−ST−... in its original state. Unauthorized product modification is
S
not permitted.
The MTRE−ST−... may only be operated in stationary business and industrial
S
applications. The resistance of the power electronics to electromagnetic inter
ference is not designed for use in mobile systems, in households or in firms
which are connected directly to the low voltage network.
The MTRE−ST−... must be operated in a protected working area. Suitable
S
emergency stop circuitry is required if it is operated as part of a system.
5

System overview

General information on stepping motor systems
Description
Stepping motors are a special type of synchronous motor triggered through electri
cal pulses from a required control unit. Here, a pulse always corresponds to the
same rotational angle. This permits positioning without acknowledgement.
Due to their "digital" rotation, stepping motors are used as switch mechanisms
and in positioning technology. It should be noted that the control system does not
receive any kind of acknowledgement that the motor has, in fact, performed its
step.
Festo MTRE−ST42−48S−.. 0503b English
27