AEG Protect Home. 600 Mode D'emploi page 33

4.1 Specifications
MODEL
Type power
UPS-input
UPS-output
Battery
Communication
Protection
Indicator
Input voltage
Input voltage range
without battery mode
Frequency
(auto selection)
Power consumption
Rated output voltage
/AVR-technology
Rated output voltage
in battery mode
Frequency
in battery mode
Transfer time
at mains outage
Rated output current
(at 230 Vac)
Output Waveform
Type
Battery type / amount
Autonomy time at
nominal load / half load
deep discharge /
overload protection
Recharge time (to
90% of rated capacity)
Ports
Shutdown software
"Compuwatch"
AC mode
Backup mode
Fault
32
PROTECT HOME.
600 VA / 300 W
( 1ph ~ / N / PE )
230 Vac
+ 6% / - 10%
50 / 60 Hz ± 5 Hz
3.0 A max.
230 Vac
±10%
50 / 60 Hz ± 1 Hz
Default setting: 50 Hz
2 – 6 ms (typical)
2.6 A
Approximately sine wave
Sealed, maintenance-free (A-brand)
1221 W / 1 battery
3 min. / 8 min.
Yes
8 h
USB and RS232
for status and measurement levels
For all popular operating systems
(e.q. Windows, Linux, Mac) on CD
Overload and short circuit protection
Surge protection for
phone, fax, modem (RJ11)
Green LED
Yellow LED
Red LED
EN