Samsung NE63875S Serie Mode D'emploi page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Inserting and removing an oven rack
Rack and Pan placement
3
4
or
Single Oven Rack
5
3
Multiple Oven Rack
NE63T8751_AA_DG68-01208A-00_EN+MES+CFR.indb 37
To insert an oven rack
1.
Place the rear end of the rack on a rack
guide.
2.
Slide the rack into the rack guide while
holding the front end of the rack.
To remove an oven rack
1.
Pull out the rack until it stops.
2.
Pull up the front end of the rack and
remove it from the rack guide.
Centering the baking pans in the oven as
much as possible will produce better results.
If baking with more than one pan, place the
pans so each has at least 1" to 1½" of air
space around it.
When baking on a single oven rack, place
the oven rack in position 3 or 4. See the
figure on the left.
When baking cakes and cookies on multiple
racks, place the oven racks in positions 3
and 5. See the figure on the left.
Using Multiple Oven Racks
Type of Baking
Rack Positions
Cakes and Cookies
3 and 5
Before using the racks
The oven has two racks.
Each rack has stops that need to be placed correctly on the supports. These stops
will keep the rack from coming completely out.
REMOVING THE RACKS
1.
Pull the rack straight out until it stops.
2.
Lift up the front of the rack, and then pull it out.
REPLACING THE RACKS
1.
Place the end of the rack on the support.
2.
Tilt the front end up and push the rack in.
CAUTION
Do not cover a rack with aluminum
foil or place aluminum foil on the
oven bottom. This will hamper heat
circulation, resulting in poor baking,
and may damage the oven bottom.
Arrange the oven racks only when the
oven is cool.
English 37
2020-03-27
2:47:45

Publicité

Table des Matières
loading

Table des Matières