WAGNER CHAMPAGNE Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
GB
Congratulations on the purchase of your WAGNER suspended lamp CHAMPAGNE.
Read the operating instructions carefully before putting the device into operation and
observe the safety instructions. Keep the operating instructions in a safe place.
Note!
Your CHAMPAGNE is weather-resisting and should be operated with
direct exposure to solar radiation. Erect your CHAMPAGNE so that it
receives maximum exposure to the solar radiation to increase its capacity.
CHAMPAGNE is equipped with a NiCd-rechargeable battery. This
rechargeable battery is not loaded upon delivery. After the device has been
put into operation, the rechargeable battery requires ca. 3 days of sun to
attain its full capacity. Briefer, weaker emission of light is normal during this
period of time and is not a defect.
Solar field
Size
Capacity at full exposure to solar radiation
Rechargeable battery
Voltage
Loading capacity
Luminous element
Duration of emission of light
ASSEMBLY (A + B)
Carefully remove your CHAMPAGNE and the fittings out of the box.
Open the solar station.
Pull the orange-marked foil strip out of your Ihrer CHAMPAGNE.
Close the solar station.
Connect the cable to the solar station.
Your CHAMPAGNE is now ready for operation.
WARNING!
Contact with hidden lines can lead to severe injury or even death!
Please ensure while digging and boring holes that you do not hit
any hidden lines.
Put the pole into the ground spike.
Drive the ground spike into the ground.
Point the solar station to the south.
4
Operating Instructions
Technical data
CHAMPAGNE
Mono-crystalline
3600 mm²
ca. 0,45 W
NiCd
2 x 1,2 V DC
600 mAh
2 x 1 LED
max. 8 h

Publicité

Table des Matières
loading

Table des Matières