Video Setting; Channel Search - SOUNDMASTER PDB1960 Mode D'emploi

DVB-T2 First Time Installation
Sort
Sort your channels from the following options: [LCN] - Sort the
channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
LCN (Logical channel number)
Set LCN on or off.

Video Setting

To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter
Box, 4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to get the
maximum display when watching TV.
.
Resolution
If the video does not appear correctly, change the setting. This setting is
to match the most common setting for HDMI.
[480i]: for NTSC system TV
[480P]: for NTSC system TV
[576i] for PAL system TV
[576P]: for PAL system TV
[720P]: for NTSC or PAL system TV
[1080I]: for NTSC or PAL system TV
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV
[PAL]: for PAL system TV.

Channel Search

To access the menu,press SETUP and select [Search Channel]. The
Menu provides options to adjust the Search Channel settings. Select an
option and press RIGHT/LEFT to adjust the settings. Press EXIT to exit
the Menu
10