Table des Matières
Publicité
Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1
Identify and mark the location where you want to install the bracket, ensuring that it is at least
20 cm from the ceiling.
Step 2
Using a 6 mm drill bit, drill a 25 mm deep hole over the mark. For a plaster, drywall, or concrete
wall, insert the plastic anchor to support the screw first.
Step 3
Twist the supplied screw into the wall or anchor, making sure to leave enough clearance between
the screw head and the wall.
D-Link DCS-2802KT-EU User Manual
Getting Started
Mounting the Camera
Snap Mount
1
2
3
10
Publicité
Table des Matières
