FLAEM NUOVA AD701K Mode D'emploi page 18

14. Setting the date/hour
1. To adjust the date/ time in the monitor, press the
key. The display will show a blinking number
showing the hour.
2. Change the hour by pressing the "+" key. Each
press will increase the number by one in a cycling
manner. Press the
entry, and the screen will show a blinking number
representing the minute.
3. Change the minute, and date as described in Step
2 above, using the "+" key to change and the
key to confirm the entries.
4. "0" will reappear as the Blood Pressure Monitor is
ready for measurement again.
15. Data transfer to PC
This accessory can be bought upon request
This unit is equipped with a Data Link Socket; through the
suitable interface it can be connected to the PC. Moreover, a
software for the following operations is included:
• Data interpretation
• Patient health records
• Measurements of blood pressure values
• Average feature for blood pressure
• Analysis of diagram, histogram and distributed drawings
17
key again to confirm the
MON
+
Repeat process to set time and date
Data Link Socket
Press the button
Blinking hour
D
Increasing hour
Confirm the entry