LG WDP3T Directives D'installation page 5

PEDESTAL INSTALLATION – FINAL INSTALLATION
Raise
1 Loosen the locknuts on all 4 leveling feet
of the pedestal until you can turn them
with the wrench. Turn clockwise to raise or
counterclockwise to lower until the pedestal
is level and all 4 feet are solidly against
the floor.
Using the Floor Pads
When installing the pedestal on a wooden
fl oor, place the fl oor pads included with your
appliance under the legs of the pedestal. This
will help reduce vibration when the appliance
is operating.
3
To make sure the appliance is well set on
the pedestal.
Please adjust all four adjustable feet and lock
nuts of the appliance accordingly.
Lower
2
GAP
P E D E S TA L K I T P E D E S TA L K I T
Locknut
Securely tighten all locknuts by hand.
NOTE: Noise and vibration may result if
locknuts are not tightened.
Be sure to connect the appliances to all
water, power, or gas lines and draining or
venting connections before operation.
If there is excessive vibration during the
first operation after installation, slightly
adjust the leveling feet.
5