LG WDP3T Directives D'installation page 3

PEDESTAL INSTALLATION – WASHER
Make sure the leveling feet of the appliance
1
are fully retracted.
Once the leveling feet of the washer are fully
retracted, tighten all locknuts securely.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
3
Make sure the back feet are in the correct
positions.
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
Tighten all 4
locknuts securely
P E D E S TA L K I T P E D E S TA L K I T
For dryer
For washer/combo
Position the appliance on top of the pedestal.
2
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
Make sure the holes on the pedestal align
4
with the holes in the appliance, then install 4
screws at each corner to securely attach the
appliance to the pedestal.
NOTE: If the screws are not installed
properly, noise and vibration may result.
Move the appliance to the desired location.
3