sunjoe 24V-MJ14C Manuel De L'opérateur page 10

NOTE: The upper handle is equipped with two sets of
holes on each side of the frame, however, only one set is
necessary to secure to the lower handle (Fig. 5). Simply
select your preferred height, and secure as shown (Fig. 4).
Fig. 5
3. Secure the power cable to the lawn mower by using the
cable clips.
Grass Collection Bag Assembly + Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine (Fig. 6).
Fig. 6
Plastic
cover
Support rod
2. Place the protective plastic straps onto the support rod
(Fig. 7).
Upper handle frame
Shorter handle
setting
Longer handle
setting
Fig. 7
Protective
plastic
straps
Support rod
3. Lift the ejector flap with one hand. With the other hand,
hold the grass collection bag by the handle and hook it in
from above (Fig. 8).
Fig. 8
Grass collection
bag
4. Release the ejector flap to secure the grass collection bag
in position (Fig. 9).
Fig. 9
Ejector flap
10
Ejector flap
Grass
collection
bag