Midi Operation; Midi Map - Chauvet DJ Foot-C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MIDI
Operation

MIDI Map

Foot-C User Manual Rev. 2
The Foot-C can be externally controlled by a MIDI signal through the MIDI in port on the
rear panel. This will work at any time, as long as there is a MIDI input.
To select the MIDI receiving channel:
1.
Press and hold <DELETE> for three seconds. The indicator next to <DELETE> will
light up.
2.
Release <DELETE>. The display will have changed to show the MIDI receiving
channel.
3.
Use <UP> and <DOWN> to select a MIDI receiving channel 1–16.
4.
Press and hold <DELETE> for three seconds. The indicator next to <DELETE> will
turn off.
5.
Release <DELETE>. The display will have returned to normal.
·
The controller will only respond to MIDI commands on the selected MIDI
channel when SPEEd is set to 0.
·
Perform all MIDI control using NOTE_ON or PROGRAM CHANGE commands.
All other MIDI instructions are ignored.
·
To stop a chase, send the BLACKOUT ON note.
NOTE_ON
MIDI Note
00–23
24–35
36
127
PROGRAM CHANGE
MIDI Note
10–21
30–53
60–76
80–95
100
101
MIDI operation always runs in the background during use.
Function (Turns On/Off)
SCENE 1-24 ON
CHASE 1-12 ON
TAPSYNC
Blackout
Function (Turns On/Off)
CHASE 1-12 ON
SCENE 1-24 ON
Set Speed 1-16
Set Fade 1-16
Blackout On
Blackout Off
Page 21 of 88

Publicité

Table des Matières
loading

Table des Matières