Compliance Statement - Uniteck UNIDETECT 10.12 Manuel D'instructions

COMPLIANCE STATEMENT

UNITECK testifies that the motion detector described in this manual is manufactured in accordance
with the requirements of the following European directive:
- Low voltage directive : 2004/108/CE du 15/12/2004
It complies to the harmonised standards:
- IEC 61000-4-2: 2008
- IEC 61000-4-3: 2006 / A1: 2007
- EN 55015: 2006 / A1: 2007 / A2: 2009
- IEC 61000-4-8: 1993 / A1: 2000
- EN 60669-2-1 / A1: 2009
- EN 61547: 1995 / A1: 2000
CE-date of tagging: January 2017.
01/01/2017
Société Uniteck
1 Avenue de Rome
Zae Via Europa –
Immeuble le Cassis
34350 Vendres
France
Mail : sav@uniteck.fr
Fax
: + 33 (0) 4 88 04 72 20
WARRANTY
Warranty covers any defect, manufacturing defects for 1 year from the date of its purchase (parts and
labour).
Warranty does not cover:
- normal wear of parts (Ex.: cables, etc.).
- panel-module/battery voltage errors, incidents due to inappropriate use, fall, disassembly or any damages
due to transport.
In case of failure, return the product to your distributor by attaching:
- the dated proof of purchase (receipt, bill...)
- explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected returns.
After the warranty, our after-sales service ensures repairs after acceptance of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa - bâtiment Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
Fax : +33 (0)4 88 04 72 20
www.uniteck.fr
Yoann Fourmond
General Director
EN
15/22