Kaiser EKK 60174 Mode D'emploi page 8

8
EN
GROUNDING
The power cord has a three-pronged
grounded plug for your personal safety.
It must be connected to a grounding
type wall receptacle, in accordance
with the legislation governing electric
installations in your country, as well as
any local regulations. Do not remove
the grounding prong, do not use a two
pronged adaptor, and never make a
connection to the schematic. Use the
cord supplied with the equipment (do
not exchange it). If the cord is
damaged, it must be immediately
replaced by specialized personnel.
!
Attention! Grounding must be
provided for your safety. If there is no
grounding, contact a qualified
technician.
INSTALLATION
• Remove the package and self-
adhesive tape used to protect the
doors and accessories; use soap to
remove any glue residue;
• Keep expanded polystyrene packing
elements; these elements, foil and
self-adhesive tape will be used to
pack the refrigerator for protection
during transportation;
• Wash the refrigerator's interior and
accessories with warm water and
dishwashing liquid and then wipe
dry;
• Place the refrigerator in a dry
ventilated place protected from
direct sunlight and at a sufficient
distance from heat sources such as
a kitchen stove, radiator, etc. If this
condition cannot be met, use a
suitable insulating plate when
installing the refrigerator near heat
sources or provide the following
clearance from heat sources: from
the kitchen stove – 3 cm; from oil or
coal stoves – 30 cm;
• When installing the refrigerator next
to another refrigerator or a freezer,
ensure side clearance of at least 2
cm;