Publicité
Les langues disponibles
Les langues disponibles
Fix the chain to the landing door apron, so that it is accessible from the landing door.
At first check if the distance between the car and the landing door apron is at least 15mm, otherwise there
has to be chosen an alternative fixing possibility near the lift door.
Also the chain has to be fixed to the ladder beam nearest to the shaft adit. If necessary the chain has to be fixed to the
other ladder beam.
Important!
The chain has to be fixed so, that there is no danger of stumbling.
Yellow advice label for parallel mounting:
Glue the yellow advice label on the highest ladder beam,
so that the arrow shows into the right direction.
Choose the right label for your requirements.
Final safety inspection
At the end check again, if the distance from the car and the apron to the ladder in folded position is
sufficient when the buffers are completely compressed and if the travelling cables are not colliding
with the ladder.
If there accur any imponderabilities while mounting, which get in the way of professional mounting,
the operations have to be cancelled and it is necessary to consult the manufacturer.
Fixing the chain
with accompanying
tapping screw
© W
W 12/2018 Version 15
+
533092
TRI-KLAPP 5
9
Publicité
