Overheat Protection; Safety Control (Anti-Overturning Switch) - Olimpia splendid CALDO ROCK M Instructions Pour L'installation, L'emploi Et L'entretien

5 - OVERHEAT PROTECTION

• This heater is protected with overheat protection that switches off the appliance
automatically in case of severe overheating
In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
- remove any possible cause of overheating, eg. something covering the
heater;
- check for damage to the appliance, the cord and the plug.
If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for
assistance.

6 - SAFETY CONTROL (ANTI-OVERTURNING SWITCH)

• If the appliance falls or overturns, the anti-overturning switch is activated and
automatically turns it off.
• For the "M" and "O" versions, the heater will start working as normal again
after put to the upright position.
• For the "DT" version, need to reset on the control panel again to get the
heater working.
EN- 16
"M" - "O" "DT"