Critical Installation Warnings - Samsung ME21K7010D Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important safety instructions
CRITICAL INSTALLATION
WARNINGS
This appliance must be installed by a qualified technician or service
company.
Failing to have a qualified technician install the oven may result in
electric shock, fire, an explosion, problems with the product, or injury.
Unpack the oven, remove all packaging material and examine the oven for
any damage such as dents on the interior or exterior of the oven, broken
door latches, cracks in the door, or a door that is not lined up correctly.
If there is any damage, do not operate the oven and notify your dealer
immediately.
Make sure to install your oven in a location with adequate space.
Remove all foreign substances such as dust or water from the power plug
terminals and contact points using a dry cloth on a regular basis.
Unplug the power plug and clean it with a dry cloth.
Failing to do so may result in electric shock or fire.
Plug the power cord into a properly grounded 3 pronged outlet. Your oven
should be the only appliance connected to this circuit.
Sharing a wall socket with other appliances, using a power strip, or
extending the power cord may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
Ensure that the voltage, frequency and current provided match the
product's specifications. Failing to do so may result in electric shock or
fire.
Keep all packaging materials out of the reach of children. Children may use
them for play.
SAVE THESE INSTRUCTIONS
6 English
ME21K7010DS_AC_DE68-00000A_EN.indd 6
This appliance must be properly grounded. Read and follow the specific
"Grounding instructions" found in the beginning of this section. Do not
ground the appliance to a gas pipe, plastic water pipe, or telephone line.
This may result in electric shock, fire, an explosion, or problems with the
product.
Never plug the power cord into a socket that is not grounded correctly
and make sure that it is grounded in accordance with local and national
codes.
Do not cut or remove the third (ground) prong from the power cord under
any circumstances.
Connect the oven to a 20A circuit. If you connect the oven to a 15A circuit,
make sure that the circuit breaker is operable.
Do not install this appliance in a humid, oily, or dusty location, or in a
location exposed to direct sunlight or water (rain drops).
This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged
power plug, damaged power cord, or loose wall socket.
This may result in electric shock or fire.
Do not mount over a sink.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the
power cord, insert the power cord between objects, or push the power cord
into the space behind the appliance.
This may result in electric shock or fire.
Do not pull the power cord when you unplug the oven.
Unplug the oven by pulling the plug only.
Failing to do so may result in electric shock or fire.
If the power plug or power cord is damaged, contact your nearest service
center for a replacement or repair.
1/15/2016 4:33:33 PM

Publicité

Chapitres

Table des Matières
loading

Table des Matières