Switch On And Off - Blueant RIBBON Guide De L'utilisateur

iPhone users: To use Siri it must be enabled on your phone. Go
to Settings > General
to ON. If you have set a passcode lock, you will need to set
to ON in the passcode lock menu.
Android users: Depending on your handset, you may need
to disable the phone password lock to use voice dialing over
Bluetooth. Check your phone manual for further information.

Switch On and Off

To
Power On
Power Off
Note: The Ribbon will switch off automatically after 5 minutes
if there is no phone or music source connected.
on your iPhone and check that
Do This
Hold down
until the LED is solid white (red if
the battery charge is low)
Hold down
until the LED fl ashes red
Siri
for about 3 seconds,
for about 3 seconds,
is set
Siri
11