Table des Matières
Publicité
Press the "timer" button P to exit the weekly timer setting mode and return to the
time and a day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should have
the same setting times.
4
86
Then, use the adjustment keys O to set
the minute. Press the adjustment key M
to increase the minute and the key N to
decrease the minute. Press extension/day/
set S to select the right minute.
Use the adjustment keys O to set the hour at
which the heater must shutt off.
Press the adjusment key M to increase the
hour and the key N to decrease the hour.
Press extension/day/set S to select the right
hour.
Then, use the adjustment keys O to set
the minute. Press the adjustment key M
to increase the minute and the key N to
decrease the minute. Press extension/day/
set S to select the right minute.
The settings for program 1 for Monday are
programmed and the display shows SET for
3 seconds.
After 3 seconds choose another day or end
the setting mode by pressing timer.
Make sure that the heater is not burning. Press the
timer key P. Use the adjustment keys O until the day
of its source is displayed in the display.
Press extension/day/set S to select.
The display shows:
Publicité
Table des Matières
