Operating Mode "Convection" Without Preheating; Multi-Stage Cooking" Mode - Caso Germany EMCG 32 Mode D'emploi Original

13.13.2
1) Press
2) Press
mode. When temperatures are displayed, this inidicates the convection
mode. The temperature can be chosen from 140° and 230° C.
3) Press
4) Turn
confirm by pressing
5) When the end of the cooking time has been reached the system will
sound five signal tones.

13.14 "Multi-stage Cooking" Mode

In this mode you can program up to up to 2 automatic cooking sequences.
The sequence and duration of defrosting, microwaving, grill (combination)
or convection cooking can be adjusted.
If you intend to use the defrost function, this must be programmed as the
first function in the sequence.
► The automatic cooking programmes and the preheating function
cannot be used for multi-stage cooking.
Example: If you want to defrost food for 5 minutes and then microwave the
food at 80% power level for 7 minutes proceed as follows:
1) Press
defrosting by time.
2) Turn
3) Press
Press
4) Adjust the cooking time by turning
5) Press
caso EMCG 32

Operating mode "Convection" without preheating

once and "P100" is displayed.
repeatedly or turn
to confirm the temperature.
to set the cooking time to a maximum of 95 minutes and
Please note
twice and "dEF2" will be displayed to indicate
to set the defrosting time to 5 minutes.
and set the power level for microwaving to 80% by
until the display shows "P80".
to confirm.
to start the multi-stage cooking process.
to select the convection
to 7 minutes.
72