Delivery Scope And Transport Inspection; Unpacking; Disposal Of The Packaging - Caso Germany EMCG 32 Mode D'emploi Original

11.2 Delivery scope and transport inspection

As a rule, the EMCG 32 Microwave is delivered with the following
components:
• EMCG 32 Microwave
• Rolling ring
• Screw and Trim-kit plastic cover for installation
• Operating Instructions
► Examine the shipment for its completeness and for any visible
damages.
► Immediately notify the carrier, the insurance and the supplier about
any incomplete shipment or damages as a result of inadequate
packaging or due to transportation.

11.3 Unpacking

To unpack the device, proceed as follows:
• Remove all packaging and accessories.
• Check the appliance for possible damages (dents, damaged door etc.).
Damaged appliances may not be used.
• Casing: Remove the protective film covering the outside surface of the
appliance.
• The light brown/silver cover in the interior of the appliance protects the
magnetron and must not be removed.

11.4 Disposal of the packaging

The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.
Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging
materials that are no longer required to "Green Dot" recycling collection
points for disposal.
► If possible, keep the original packaging for the device for the duration
of the guarantee period of the device, in order that the device can be
re-packaged properly in the event of a guarantee claim.
caso EMCG 32
Please note
Please note
• Glass turntable
• Grating
57