Low Runtime And Remote Start Shutdown Alerts; Optional Rear Defogger; Starter Anti-Grind Circuitry; Disabling The Remote Start System - Clifford 4811X Guide Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

door prior to Step 4. Then, instead of pressing the remote control but-
ton, press and release the optional dash mounted activation button*.
The engine continues running for the shorter Turbo Mode runtime after
the doors are closed.
* Turbo Timer mode must be turned on and an optional activation but-
ton also installed by an authorized dealer.

Low Runtime and Remote Start Shutdown Alerts

During remote start, the system sill send a low runtime alert to the 2-way
remote when the remote start reaches the three minute and one minute
runtime remaining point. When the remote start shuts down, the 2-way
remote will also play a descending tone to indicate that the remote
start has shutoff.

Optional Rear Defogger

If connected, the Defogger circuit automatically activates ten seconds
after remote starting the vehicle if the temperature is below 55°F
(12.8°C).

Starter Anti-Grind Circuitry

This system includes an anti-grind circuit (optional relay is required) that
can prevent damage to the starter motor if the key is turned to the start
position while the engine is ON.
Note: Anti-grind circuitry only works when the remote start system is
op er at ing the motor and the optional relay is installed.

Disabling the Remote Start System

When the Remote Start shutoff switch is set to the OFF position, remote
engine starting is defeated. DO this when the vehicle is being serviced
7
© 2015 Directed. All rights reserved.

Publicité

Table des Matières
loading

Produits Connexes pour Clifford 4811X

Ce manuel est également adapté pour:

4816x

Table des Matières