Using The Radio; Using In Pc Monitor Mode - Philips 17PF8946/12 Mode D'emploi

Using the radio

Choosing radio mode
Z
Press the key on the remote control to
switch the TV to radio mode. Press the
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
Selecting programmes
0 9 @
Use the / or
FM stations (from 1 to 40).
List of radio stations
M
Press the key to display / hide the list of
radio stations. Then use the cursor to select a
station.

Using in PC monitor mode

Choosing PC mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.5).
V
Press the key on the remote control to
switch the TV to PC mode . Press the
to return to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using the PC menus
H
Press the key to access the specific settings of
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• :
Picture
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
- : to adjust the colours (cold,
Adjust Colour
normal or warm).
• : to choose the sound
Audio Selection
10
X
#
P keys to select the
X
key
: to adjust the
: to adjust the horizontal
Using the radio menus
H
Use the key to access the specific radio
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the
Install
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the menu you can activate / close
Features
the screen saver. The time, the frequency of
the station and its name (if available) move
across the screen.
(only available on certain versions)
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
• :
Features
- : eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase
- (Only available on certain
View Format
versions): to choose between large screen or
the original format of the PC screens.
- : position is set automatically.
Auto Adjust
•
Reset To Factory Setting
factory settings (default settings).
• : to come back to TV or radio
Mode Select
mode.
menu :
Auto Store
(for
Manual Store
) interfering lines.
Clock
: to return to the