Bluetooth Operation; Disconnecting A Bluetooth Device - MAC Audio MAC 620 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Bluetooth oPerAtion

You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can
also listen to music from a Bluetooth-enabled device.
Pairing the Bluetooth-enabled devices
To connect your Bluetooth device to the unit, you need to pair the
device to the unit. Pairing needs only to be done once. You can
pair up to five devices. You also can search for Bluetooth devices
by mobile phone.
1. Turn on the Bluetooth function on the device.
2. Touch [
] to search for Bluetooth device with the device.
3. Select the Bluetooth device ID in the pairing list.
4. Enter default password "0000".
note:
The operational range between this unit and a Bluetooth device is approximately 5 meters .
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of the device.
Compatibility with all Bluetooth device is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
Keep this unit away from any other electronic device that may cause interference.

Disconnecting a Bluetooth Device

To disconnect a device, touch [
note
The device will also be disconnected when the device is moved beyond the operational range.
If you want to reconnect the device to the unit, place it within the operational range.
If you do not want to reconnect the device to the unit automatically, touch [
[ Auto connect ] to [ Off ].
For details, see the "Adjust Bluetooth Settings" section.
Making a Call
1. Select [ Bluetooth ] in the Main Menu.
2. Pair the phone with the unit.
3. Search for phone number from the following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch [
] .
] to dial.
45
], then set

Publicité

Table des Matières
loading

Table des Matières