Victron energy 6V/12V-1,1A Manuel page 3

1. Introduction
This charger has been designed for charging a variety of 6V and
12V lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 30Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.
2. Indicator panel
LED STATE
STANDBY Standby, or stopped due to bad connection
6V Press MODE button to select 6V battery
12V 12V battery
! Reverse connection detected, check polarity
CHARGE
Charge Level indicator
LEVEL
3. Charging modes, safeguards
[1] STANDBY (STANDBY)
Once connected to the mains, the charger automatically resets and
remains in standby mode until activated by pressing the MODE button.
3