Hanging The Heater; Connecting The Power - Dyna-Glo EG5000DG Guide De L'utilisateur

HANGING THE HEATER

1. Attach the heating unit to the mounting bracket.
2. Lift the heater up and into the mounting bracket.
3. Align the bracket screws with the keyhole slots in the mounting bracket.
4. If the heater is to be tilted it must be positioned in the keyhole slots - see figure 5.
5. Tighten the bracket screws with a wrench so the unit is securely suspended at
horizontal or vertical level.
Figure 5

CONNECTING THE POWER

6