Télécharger Imprimer la page

Gardigo BELL-STOPPER Notice D'utilisation page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5. Getting Started
Inserting the batteries:
• The device is powered by a 9V battery (6LR61).
• Open the cover of the battery compartment [ ] under the microphone [ ] by
pushing it downwards.
• Insert the batteries. Make sure that the polarity is correct and as shown in the batte-
ry compartment.
• Close the battery compartment by sliding the cover back on.
Mounting and Use:
The Bark-Stopper can be mounted to the wall with the wall bracket [ ] and taken out
when needed:
• For the mounting location choose the area where the dog frequently barks.
• Make sure that the device is mounted out of reach of the dog.
• Choose a location where the sound can easily distribute itself.
• Switch the device on by using the I/O switch [ ].
• The sensitivity switch [ ] has two settings with which the sensitivity of the micro-
phone can be set:
Low: effective range approximately 3 m – 4 m
High: effective range approximately 6 m – 7 m
• The device will switch on if the dog barks continuously over 10 to 20 seconds. The dog
will learn to link the uncomfortable sound with his barking and after a time it will
stop barking.
• Praising the dog and giving it treats will accelerate the learning process.
6. General information
• The CE conformity has been proven and the declarations are deposited with us.
• For safety and conformity reasons it is not permitted to rebuild or modify the device
and/or use it in any other way than described above.
• This device has a warranty of two years. As Gardigo has no control of the correct of
appropriate installation and use of the device the warranty can only be applied to a
fully equipped device in prime condition. We assume neither warranty nor liability
for damages or following damages related to this product. This applies especially if
it has been modifications or repairs have been made by the customer, if the circuitry
has been modified or components have been used other than the original compo-
nents and/or if the operation of the device has been incorrect, careless or abusive.
10

Publicité

loading

Produits Connexes pour Gardigo BELL-STOPPER

Ce manuel est également adapté pour:

60061