Philips Satinelle Ice Premium Mode D'emploi page 16

EnglisH
16
Problem
The pivoting
cooling head of
the leg skin
cooler does
not move.
It is not
possible to
remove the
epilating head.
It is not
possible to
remove the
shaving head
(HP6502 only).
Reduced
shaving
performance
(HP6502 only).
Stronger skin
irritation than
usual after
shaving
(HP6502 only).
Possible cause
The pivoting
cooling head is
frozen.
You did not
move the
epilating head in
the right
direction.
You did move
the shaving
head in the right
direction.
The shaving
head is dirty.
The cutter unit
is damaged or
worn.
The cutter unit
is damaged or
worn.
Solution
Pass the skin cooler over your leg
a few times to make it pivot again.
Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
Press the release button and move
the epilating head in the direction
of the arrow to remove it. (Fig. 12)
Press the release button and move
the shaving head in the direction
of the arrow to remove it. (Fig. 12)
Switch off the appliance, unplug it
and remove the shaving head.
Then clean the cutter unit and the
shaving head with the cleaning
brush supplied. Remove any hairs
that are stuck under the trimmers.
Replace the cutter unit.
Replace the cutter unit.