Setting The Dcs Advanced Digital Code - AEG PMR Voxtel R300 Guide D'utilisation

Press the menu button
number flashes on the LCD screen.
Press the up
sub-channels.
Press the PTT button to confirm the sub-channel setting.
4.3.2

Setting the DCS advanced digital code

Each channel also has 83 digital codes to let you set up group of users
for more secured private communication.
Press the menu button
screen.
Press the up
Press the PTT button to confirm the DCS channel setting.
Transmitting and receiving
The PMR transmission is "one way-at-a-time." While you
!
are speaking, you can not receive a transmission.
The PMR is an open-license band. Always identify yourself
when transmitting on the same channel.
4.4 Receiving
The unit is continuously in the receive mode when the unit is turned on
and not transmitting. When a signal is received on the current channel,
RX
icon will be displayed on the LCD screen and the receiver LED
lights up.
4.5 Transmitting (sending a speech)
Press and hold the PTT (push to talk) button to transmit your voice.
TX
icon will be displayed on the LCD screen.
Hold the unit in a vertical position with the microphone 5 cm away
from the mouth. While holding the PTT button, speak into the
microphone in a normal tone of voice.
Release the PTT button when you have finished speaking.
4.6 Monitor
You can use the monitor feature to check for weak signals on the
current channel.
twice, the current CTCSS sub-channel
or down button to select one of the 38 CTCSS
3 times. DCS code is blinking on the LCD
or down button to select the desired DCS code.
9