INVENTOR G4INV-20DTB Manuel D'emploi page 8

Floor Positioning
Castor Wheel Placement
Follow the instructions bellow for correctly fitting the castors.
• Before placing your unit upside down, apply a soft piece of cloth or towel on the floor to prevent
damage to the glass panel.
• In the corresponding slots, located on the sides of the bottom surface of the unit, press each
castor into place until you hear a clicking (locking) sound.
When the installation is complete, you will hear a "click" sound.
If the installation is complete, you will hear a
"click" sound
Lock function for castor
Push the button and pull
outwards at the same time, in
order to remove the caster
Press downwards the lock button,
for locking the castors in position
8
Push button