Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications. Modifications or changes to
the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
Switch on, measure and switch off:
device on
1x
Change unit of measure:
m / ft / inch / _' _"
3 sec
Change measurement point (reference):
rear
!
To ensure correct measurements plug in pin so that it
clicks into position!
Change measurement function:
length
(device on)
1x
12
GB
laser on
1x
1 sec
(device on)
1x
1 sec
area
surface
1 sec
1x
2x
measure
1x
Delete the last measured
value:
pin
front
1x
2x
wall
volume
3x
4x
device off
3 sec
1x
tripod
3x
Pythagoras Reference
1+2
measure-
ment
5x
6x
Publicité
Table des Matières
